Bullard Free-Air pumps transfer ambient air from a breathable air source to a supplied-air respirator. The ambient air is filtered through an inlet filter and a Carbofine outlet filter before entering the respirator's air supply hose. No carbon monoxide, oil vapor or oil mist is produced; therefore, carbon monoxide monitors, high temperature alarms or airline filters are not required. No calibration necessary. Supplied-air respirators used with these pumps must be NIOSH approved to operate at 15 psi or less. Two-Three Worker Pump Supplies air to 3 continuous-flow supplied-air, half- or full-face mask respirators, or 2 continuous-flow supplied-air, hood or helmet respirators. Operates with a totally enclosed fan cooled motor. For use in applications with oily, moist or dusty conditions. Airflow 16 cfm at 5 psig. Features: Pumps are completely mobile and protable; no expensive installation costs. Supplies air to two continuous flow airline hood/helmet style respirators or three tight-fitting facepiece style respirators approved to operate at 15 psig or less. Air flow: 16 cfm at 5 psig. Benefits: Low-cost means of supplying clean, breathable air to workers in contaminated environments up to 300 feet away from the pump. Easy to operate and maintain. Electric and air-driven models available to suit any application. Available in a hazardous-duty version (EDP16HAZ). PUMP AIR ELECTRIC DRIVEN OIL-LESS 2-3 PERSON 16CFM
